Type: |
Hinged Expansion Joints |
Size: |
110" diameter and 39 3/8" OAL |
Material: |
321 Stainless Steel and Carbon Steel |
Design: |
250°F at 7.25 psig/FV and +/- 3° angulation |
Testing: |
Dye-penetrant and high vacuum (70 mbar) tested |
|
U.S. Bellows custom-designed this hinged expansion joint for a combined cycle power plant in Texas. This expansion joint is one of 11 units constructed and has a nominal diameter of 110" with an overall length of 39 3/8". The bellows are fabricated from 321 stainless steel with a carbon steel weld ends, cover, and hinges. This hinged joint is part of a condenser duct complex that is designed to operate at 250°F at 7.25 psig/FV, with +/- 3° angulation. All expansion joint welds were 100% dye-penetrant tested and high vacuum (70 mbar) tested prior to shipment.
This expansion joint was featured in our lastest Techinical Bulletin:
Click here to learn more about air-cooled condenser expansion joints