|
|
|
Notes:
|
|
Flanged Universal Expansion Joint |
|
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the how to order section.
- To increase cycle life or movements, please refer to graph on cycle life.
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Tabulated values are for tied joints, with butt weld ends. Performance of joints with flanged ends, and unrestrained joints, will exceed tabulated values.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: See catalog flange data for appropriate flange temperature/pressure ratings.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
|
Size |
Pressure |
Non-concurrant Movements/Spring Rates |
Lateral Movement/Spring Rates |
Axial |
48 |
in.
Overall Length |
60 |
in.
Overall Length |
72 |
in.
Overall Length |
Movement |
Spring Rate |
1219 |
mm
Overall Length |
1524 |
mm
Overall Length |
1829 |
mm
Overall Length |
Movement |
Spring Rate |
Movement |
Spring Rate |
Movement |
Spring Rate |
PSIG |
in. |
lb./in. |
in. |
lb./in. |
in. |
lb./in. |
in. |
lb./in. |
kg/cm2 |
mm |
kg/mm |
mm |
kg/mm |
mm |
kg/mm |
mm |
kg/mm |
44 |
50 |
2.42 |
1008 |
4.14 |
412 |
5.93 |
221 |
7.02 |
427 |
3.5 |
61 |
18.0 |
105 |
7.37 |
151 |
3.95 |
178 |
8 |
115 |
1.20 |
6238 |
2.28 |
2184 |
3.41 |
1094 |
4.5 |
1750 |
8.1 |
30 |
111.6 |
58 |
39.08 |
87 |
19.58 |
114 |
31 |
46 |
35 |
2.30 |
729 |
3.95 |
298 |
5.65 |
160 |
7.02 |
281 |
2.5 |
58 |
13.0 |
100 |
5.33 |
144 |
2.86 |
178 |
5 |
95 |
1.44 |
4513 |
2.75 |
1581 |
4.11 |
792 |
5.69 |
1150 |
6.7 |
37 |
80.8 |
70 |
28.29 |
104 |
14.17 |
145 |
21 |
48 |
35 |
2.16 |
907 |
3.65 |
375 |
5.19 |
203 |
6.58 |
335 |
2.5 |
55 |
16.2 |
93 |
6.71 |
132 |
3.63 |
167 |
6 |
95 |
1.30 |
5572 |
2.44 |
1984 |
3.62 |
1002 |
5.09 |
1372 |
6.7 |
33 |
99.7 |
62 |
35.50 |
92 |
17.93 |
129 |
25 |
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section.
Flanges: ASTM A105.
35-50 PSIG Series: 125 lb. Lt/Wt FFSO.
95-115 PSIG Series: Customer to specify actual flanges required.
Plate flanges and angle flanges available for low pressure systems.
Pipe: ASTM A-285-C
35-50 PSIG Series: 0.375-inch wall
95-115 PSIG Series: 0.375-inch wall.
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel
|