|
|
|
< Back to Index
|
|
Flanged Universal Expansion Joint |
|
84 inch Through 144 inch Nominal Diameter
Notes:
- Rated life cycle at 650°F is 3000 cycles for any one tabulated movement.
- To combine axial, lateral and angular movements, please refer to the how to order section.
- To increase cycle life or movements, please refer to graph on cycle life.
- Rated bellows extension is equal to rated axial movement. Provided bellows is precompressed the amount of design extension. Installed overall length will decrease by the amount of precompression.
- Tabulated values are for tied joints, with butt weld ends. Performance of joints with flanged ends, and unrestrained joints, will exceed tabulated values.
- Maximum test pressure: 1.5 X rated working pressure.
- Bellows rated for 650°F: See catalog flange data for appropriate flange temperature/pressure ratings.
- Pressure thrust load applied to adjacent pipe anchors/equipment when unrestrained expansion joints are used.
|
Size |
Pressure |
Non-concurrant Movements/Spring Rates |
Llateral Movement/Spring Rates |
Axial |
60 |
in.
Overall Length |
72 |
in.
Overall Length |
84 |
in.
Overall Length |
Movement |
Spring Rate |
1524 |
mm
Overall Length |
1829 |
mm
Overall Length |
2134 |
mm
Overall Length |
Movement |
Spring Rate |
Movement |
Spring Rate |
Movement |
Spring Rate |
PSIG |
in. |
lb./in. |
in. |
lb./in. |
in. |
lb./in. |
in. |
lb./in. |
kg/cm2 |
mm |
kg/mm |
mm |
kg/mm |
mm |
kg/mm |
mm |
kg/mm |
84 |
45 |
1.10 |
17326 |
1.84 |
7437 |
2.59 |
4096 |
5.65 |
2358 |
3.2 |
28 |
310.1 |
47 |
133.09 |
66 |
73.30 |
144 |
42 |
96 |
40 |
0.97 |
24772 |
1.60 |
10757 |
2.24 |
5963 |
5.45 |
2699 |
2.8 |
25 |
443.3 |
41 |
192.50 |
57 |
106.71 |
138 |
48 |
108 |
35 |
0.88 |
36505 |
1.46 |
15669 |
2.06 |
8631 |
5.74 |
3040 |
2.5 |
22 |
653.3 |
37 |
280.40 |
52 |
154.46 |
146 |
54 |
120 |
30 |
0.67 |
65983 |
1.19 |
25681 |
1.74 |
13488 |
5.79 |
3380 |
2.1 |
17 |
1180.8 |
30 |
459.57 |
44 |
241.37 |
147 |
60 |
132 |
25 |
0.61 |
87604 |
1.09 |
34096 |
1.59 |
17908 |
5.82 |
3721 |
1.8 |
15 |
1567.7 |
28 |
610.16 |
40 |
320.47 |
148 |
67 |
144 |
25 |
0.46 |
156468 |
0.89 |
53883 |
1.34 |
26764 |
5.82 |
4062 |
1.8 |
12 |
2800.1 |
23 |
964.26 |
34 |
478.95 |
148 |
73 |
Materials
Bellows: A240-T304. Alternate materials available upon request. Refer to the materials section.
Flanges: ASTM A105.
40-45 PSIG Series: (96" and 84" dia) 125 lb Lt/Wt/FFSO
25-30 PSIG Series: (108" and 144" dia) customer to specify actual flanges required.
Plate flanges and angle flanges available for low pressure systems.
Pipe: ASTM A-285-C
25-45 PSIG Series: 0.375-inch wall
Liners: A240-T304.
Covers: Carbon steel.
Tie Rods, Hinges, Gimbals: Carbon steel
|